ProPlex CAT6a Extended Length S/FTP Ethernet Cable

ProPlex logo

CAT6a Extended Length S/FTP Ethernet Cable

PCCAT6APX

 

 

FeaturesDownloads

PCCAT6APX with full verified CAT6a performance up to 100 meters!

Road-worthy CAT6a cable for touring applications. 10-Gigabit networking for the road!

ProPlex CAT6a flexible yet rugged patch cables combine outstanding data transmission, noise rejection and very low skew with the ability to withstand the most extreme handling and conditions, indoors and outdoors. Available as fully assembled patch cables, in standard and custom lengths, with your choice of heavy-duty RJ-45 connector formats: ProShell Extra; EtherCon; EtherCon IP Rated; and RJ45. Panel mount connectors are also available for a complete OEM Ethernet wiring solution.

Part NumberPCCAT6APX
Conductors24 AWG (0.25 mm2) 7x0.2 mm stranded tinned copper.
InsulationCellular PO, Nom. Diameter 0.055” [1.4 mm]
Insulation heat shock: 80 °C/1hour
PairsColor Coded singles twisted into pairs
Color Code: White X Blue; White X Orange; White X Green; White X Brown
AssemblyStructure: 4 pairs cabled together. Each pair wrapped with an aluminum foil providing 100% coverage. An overall braid with strength yarns
ShieldsAluminum foil over individual pairs 100% coverage plus tinned copper braid, 80% nominal coverage
JacketMaterial: Industrial grade PU compound
OD: 8.1 mm +/- 0.3 mm
Color: Black UV Resistant
Jacket material heat shock: 120 °C/1hour
MarkingProPlex PCCAT6APX 24AWG S/FTP Data Cable Cat6a Extended verified [lot no.]
Weight48.4 lbs./mft (72 Kg/Km)
Temperature RangeWorking: -40 °C to +70 °C
Bending Radius75 mm min.
Typical Operational Installation LengthUp to 100 m (@ 20 °C)
Tensile Force150 N max.
ComplianceFlame test: IEC 60332.1
Environmental: per IEC 61156-6 and ISO/IEC 11801
RoHS compliance: 2002/95/EC
Dielectric Strength700 Vrms/min.
Pair Mutual Capacitance40 pF/m
Capacitance Unbalance1.4 pF/m (800 Hz)
Pair characteristic impedance100 +/- 5 Ohm
NVP (Nominal Velocity of Propagation)80%
Max skew delay25 nSec/100m
Conductor DC resistance (20° C)93 Ohm
Resistance unbalance (within pairs)2% max.
Insulation resistanceNot less than 5 GΩ-km
Alien cross talkProven by design per IEC 61156-6
Coupling AttenuationType I per IEC 61156-6
Transfer impedanceGrade 1 per IEC 61156-6
Transverse conversion loss (TCL)Level A per IEC 61156-6

 

 

Cut Sheets

US Letter

A4

 

Limited Warranty

 

 

 

As ever, you have managed to perform minor miracles in getting things completed to deadline.
Ian Saunders White Light Ltd.
I really appreciate your attention to detail and your outstanding customer service!
Bradlee G. Jones PSAV
Thank you so much for getting this out to our customer in Macau. They were extremely impressed and grateful. You and your team did a fantastic job.
Julie Duarte 4Wall
Just wanted to say a big thank you for turning all the cable around last week. All went out on trucks in time. Appreciate all the support from you guys.
Lucy Taylor VER
Thanks for making my sh** week that little bit easier
Ed Railton Limelite Lighting Limited
TMB delivered great technical support for our supply of Flare LR Q+ fixtures. It is a great product we’re happy to stock. TMB support and the Flare product line is a great pairing.
Robert Kennedy Solotech